Sewer Line Inspection

On average, having a sewer line inspected with a camera can cost between $100 and $800. Several factors influence the price, including location, the length of the line, and the type of service used. Most average homeowners pay around $300. Having a sewer line inspected can help find possible problems like clogs and breaks. Since this kind of work is generally done with a camera and not by an actual person in the actual sewer, if digging is required, it's a good idea to shop around for prices and to get a few quotes.

Indeed, a camera inspection of the sewer is a worthy iCOestment. It allows for the visual examination of the interior of the pipelines to find obstructions, fractures, or leaks. Thus, problems can be pinpointed and rectified before they can escalate into something much more serious. A modest expenditure now could prevent a major outlay of funds later. And the inspection's efficiency makes it all the more attractive: done swiftly, it allows the homeowner to remain in a space that is both safe and sanitary.

The cost of inspecting a drain can vary by location and the kind of inspection required. Generally speaking, it falls within a range of $100 to $500. For some reason, you might find inspection costs in your area that are considerably lower or higher than this range. Equipment that is either standard or specialty can influence the cost. As can the inspectors' own report-writing protocols and the conditions of the job. If you're concerned about sewer problems, whatever it takes to pull the top off the hole is a good value. And these prices are, by the way, just for the inspecting part.

The inspection of a sewer line typically begins with the use of a specialized camera that is attached to a long, flexible cable. This camera can navigate through the piping and relay real-time footage back to a nearby monitor. The first step in the inspection is to locate the access point, which may be in the yard or basement of the home, where the camera can enter the sewer system. With the camera now inside the sewer line, our brave inspector pushes it along the path of the pipe, all the while watching the footage it is sending back to the monitor. A good inspection will identify any blockages, cracks, or tree roots that have colonized the interior of the pipe without any part of the tree that is doing the colonizing being visible from the surface. A clear sewer line is a happy sewer line.

The cost of a Roto Rooter sewer camera inspection can differ based on your locale and what you need specifically. But let's get real here; it often falls between $100 and $800. Your best bet is to reach out to your local Roto Rooter for an estimate.

There are some important considerations to keep in mind when selecting a sewer camera. The first is the size of the camera. It should fit inside the pipes you want to inspect. Picture quality is next on the list. A sewer camera should take clear pictures. Think about the camera's connection to the main power supply as well. A good connection assures that a camera can send clear pictures back to an operator seated at the main control panel. Another consideration is this: If a sewer camera must work at night or in dark conditions, it needs a light source. Red (and sometimes blue) light is preferred. A battery-operated sewer camera should use a battery that lasts long enough for it to perform at least one inspection. And then there's reliability. You don't want a sewer camera that fails when you most need it to work.

The optimum sewer line inspection camera really depends on the situation and your specific needs. Generally, a high-resolution camera that can fit inside the sewer pipes you're dealing with is what you want. The best of these are waterproof, with flexible cables that make them easy to get through the plumbing. If your situation is particularly dark, a camera that's LED-lit is a must. Many of the high-end sewer inspection cameras have recording options. Even if yours doesn't, you can see why reviewing the footage might be essential. The more basic models that were just being described have good images. They'll get you through the plumbing without falling apart.

Typically, the seller of a home or property pays for a sewer inspection, but the cost can also be part of the negotiation phase in a real estate transaction. Occasionally, the buyer will pay for an inspection themselves to ensure everything is functioning properly before the purchase goes through. This is a good precautionary step to take to avoid any unpleasant surprises later!

Clearing a clogged sewer line can be a costly endeavor, and several factors can influence the price. Simpler problems tend to be straightforward and not very pricey to resolve; in fact, you might pay just $100 to $300 for such issues. When you're confronted with a more serious situation, though—where a hack saw, for instance, might be required in lieu of a standard sewer snake—it can cost you more, with some estimates going as high as $1,000. And even those baseline figures can vary significantly depending on where you live and which company you hire to do the work.

You should consider the length of the pipes you want to inspect when selecting the appropriate length for your sewer camera. If you know the length of your sewer line, you can select a camera that reaches a little beyond that length to ensure you're inspecting the whole pipe. Many homes' sewer lines require a camera that's at least 100 feet long, but longer sewer lines might need a camera that can go up to 200 feet or more. If you don't have access to the necessary tools for measuring, your best bet is to assume your camera must be able to inspect at least 100 feet of piping to make it worth your while.